Tuesday, December 18, 2018

Mrs Claus Hug Gift Card Holder



Mrs Claus Hug Gift Card Holder-JMR
Approximate Card size: 4” x 6.75”

This card features character arms that open to release a hidden gift card section.This design is compatible with both 8X12 and 12X12 mats.


You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut friendly file here:https://www.jamieandjenn.com Coming Soon:)

1.Cut design pieces. I used double sided card stock.
2. Fold the card along score lines. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.
3. Glue the Large white head into place.
4. Glue the face into place. Glue the black belt just above the gift card section.
5. Curve the eyelashes and glue to the coordinating eye shapes on the face. Glue the mouth to the coordinating shape on the face.
6. Curve the 3 little green holly pieces and glue them into place; staggering them. Using pieces of adhesive foam square, attach the glasses. Glue the rectangular belt buckle on to the belt.
7. Using pieces of adhesive foam square, attach the nose. Glue the 3 tiny red berries to the combined holly piece.
8. Glue the hands and cuff pieces to the outside of the hands.
9. Insert gift card.
10. I used ribbon at the bottom to trim the card:).

11. Flip the card over. Glue the smaller hair piece to the coordinating shape on the backside:)

Tuesday, November 27, 2018

Polar Bear Basket




Polar Bear Basket-JMR
Approximate Box size: H 2.50” X W 3” X D 2.50”
Approximate Design size: H 5.75” X W 4.5” including handle

This basket design is a perfect container for candies or small party favors. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)


1. Cut design pieces. ( I used double sided card stock) 
2. Flip the basket base over. Fold the basket base at the score lines. Glue the feet (with cut outs) to the solid feet bases.  Glue the two mittens to the coordinating shape of the full mitten pieces.
3.  Apply glue to the two top tabs of the box base and secure them to the top (head) panel. Apply glue to the bottom two tabs and secure them to the bottom panel creating a box.
4. Using foam adhesive squares, attach the combined feet and the tail to the back side of the basket.
5. Glue the large hat piece to the backside of the front of the basket; pretty side facing forward.
6. Using pieces of foam adhesive squares; attach the hat brim piece to the front of the basket.
7. Attach the nose to the oval muzzle and then attach the combined muzzle to the front of the basket using foam adhesive squares.
8. Apply glue to the outer edges (left and right) of the backside of the scarf piece and glue to the front of the basket (covering part of the combined muzzle). Glue the eyes into place.


9. I used adhesive jewels to accentuate the eyes. Using foam adhesive squares; attach the combined mittens and the poof ball to the hat.
10. Insert the handle into the slots on each side of the basket.

11. Finish with a ribbon:)

Monday, November 26, 2018

Christmas Tree Hanging Tea Light Lantern

Christmas Tree Hanging Tea Light Lantern (Flameless)-JMRush
Lantern size: W 2.5 x D 2.5 x H 5”


This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats. A complete step by step picture tutorial can be found on my blog:https://jmrushdesigns.blogspot.com/2017/11/hanging-tea-light-lantern.html


You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

Merry Card



Merry Card-JMR
Approximate Card size: 4.25” x 5.5” 

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)




1.Cut design pieces. I used Double sided card stock.
2. Fold the card along score lines. Fold the leaves at the score marks. Glue the small “Merry” font to the larger “Merry” font; centering it.
3.- 5. Apply glue the bottom of the rounded end of the leaves and attach to the merry/leaf base. Glue the large round holly with cut out to the holly base. 
6. Attach the smaller round holly pieces to the holly base with foam adhesive squares.
7. Glue the combined holly to the Merry/leaf combined base. Using pieces of adhesive foam square, attach the combined merry to the coordinating shape on the merry/leaf base.
8. Finish with a ribbon:)

Wednesday, November 21, 2018

Black Friday 2018 Sale @ jamieandjenn.com :)

Winter Raccoon Gift Tag Ornament



Winter Raccoon Gift Tag Ornament-JMR
Approximate size: H 5.25” X W 4”

This design can be used as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 
You can purchase the Silhouette design file here: 

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. I used double sided card stock. (The hat piece is missing from the first two images..sorry:)
2. Glue the solid face to the hat scarf piece. Glue the face piece with large eye holes to the coordinating shape with smaller eye holes. Glue the hat tail stripe design pieces to the coordinating shapes on the tail.
3. Attach the nose to the muzzle piece using a foam adhesive square. Use foam adhesive squares to attach the puff ball shape to the hat piece. Glue the combined face piece to the combined scarf/hat piece. Glue the eye outline piece (white) to the combined scarf/hat piece. 
4. Glue the combined muzzle piece to the combined scarf/hat piece. Flip the raccoon tag base over and glue the coordinating shape label (white) to the backside;centering it. Flip it back over. Use a foam adhesive square to attach the muzzle to the combined hat/face pie and glue the tiny eyeballs into place.
5. Use a foam adhesive square to attach the combined hat piece to the combined hat/face piece. Use foam adhesive squares to attach the combined Hat/Face piece to the raccoon body with two legs.
6. Use foam adhesive squares to attach the combined smaller body piece to the larger one. Loop a ribbon through the top circular hole and tie. I used adhesive enamel dots to accentuate the eyes:)

Polar Bear Gift Tag Ornament

Polar Bear Gift Tag Ornament-JMR
Approximate size: H 5.50” X W 3.5”

This design can be used as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats. 

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)


  1. Cut design pieces. I used double sided card stock.
  2.  Glue the circular bear face with eye holes to the coordinating solid shape. Glue the nose muzzle piece to it’s solid coordinating shape base piece. Glue the hat design piece to it’s coordinating hat shape piece.
  3. Use foam adhesive squares to attach the two leg bear silhouette to the full bear silhouette shape. Use foam adhesive squares to attach the nose to the combined muzzle piece, The combined muzzle to the combined face, and the hat puff ball to the end of the combined hat.
  4. Glue the head /scarf piece to the combined body as shown.
  5.  Loop a ribbon through the circular hanger ay the top and use foam adhesive squares to attach the combined head to the combined body. 
  6.  Use foam adhesive squares to attach the combined hat to the combined body. I used adhesive jewels to accentuate the eyes:)

Winter Fox Gift Tag Ornament


Winter Fox Gift Tag Ornament-JMR
Approximate size: H 5” X W 3.75”

This design can be used as a gift tag and ornament and is compatible with both 8X12 and 12X12 mats.


You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. I used double sided card stock.
2. Glue the head piece with eye cut outs to the coordinating solid head piece. Glue the head/scarf piece to the coordinating shape on the two legged fox silhouette. Flip the tag base over and glue the coordinating (white) label full fox body to it; centering it.
3. Flip the tag base back over and attach the combined two leg fox silhouette to the base using foam adhesive squares. Glue the small face to the combined fox head. Glue the nose to the combined fox head.
4. Use foam adhesive squares to attach the combined fox head
to the coordinating shape on the fox base. Loop a ribbon through the circular hole at the top and tie. I used adhesive enamel dots to accentuate the eyes:)

Winter Deer Gift Tag Ornament






Winter Deer Gift Tag Ornament-JMR
Approximate Card size: W 3” X H 5.25”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)

1. Cut design pieces. ( I used double sided card stock)
2. Glue the deer head piece with eye openings to the solid deer head piece. Glue the large scarf design piece to the coordinating shape on the full deer solid base silhouette. Use foam adhesive squares to attach the combined two leg silhouette to the larger four leg deer silhouette.
3. Glue the tail and the combined full deer silhouette to the coordinating shapes on the full deer base piece. Glue the small rounded scarf piece to the coordinating shape on the combined deer.
4. Use foam adhesive squares to attach the combined deer head to the combined deer.
5. Flip the tag over and glue the white deer silhouette to the backside. Loop a ribbon through the hanger circle and tie:)

Arctic Fox Gift Tag Ornament

Arctic Fox Gift Tag Ornament-JMR
Approximate Card size: W 3.75” X H 5”

This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222


You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)



1. Cut design pieces. (I used double sided card stock)
2. Glue the face piece with eye holes to the solid coordinating shape. Glue the the muzzle piece with a cut out mouth to it’s solid base piece. Glue the scarf/head piece to the coordinating shape on the two legged fox silhouette.
3.Loop a ribbon through the hanger circle at the top. Your file will have the hole in a slightly different location… I didn’t like the way it originally was hanging;)
4. Use foam adhesive squares to attach the combined muzzle to the combined head piece. Use a foam adhesive square to attach the nose to the combined head. Use a foam adhesive square to attach the combined two legged fox to the coordinating shape on the tag base. 
5. Use a foam adhesive square to attach the combined head piece to the combined fox tag. I used adhesive enamel dots to accentuate the eyes:)

Tuesday, November 20, 2018

Christmas Bus Card


Christmas Bus Card-JMR
Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com

1.Cut design pieces. I used double sided card stock. (Please excuse the edited blobs on the tutorial images) 
2. Glue the smaller bus to the larger one. Glue the largest present box to the coordinating shape on the combined bus. Fold the card base.
3. Glue the red bus bottom and the white middle and top to the coordinating shapes on the combined bus. Use pieces of foam adhesive squares to attach the two smaller presents.
4. Glue the four silver open circles to their coordinating shapes on the combined bus. Glue the four solid circles to the inside of the open circles. Glue the last solid circle to the center of the bus; centering it.
5. Glue the three shiny red ribbon pieces to the presents at the top of the bus; largest on in the middle. Glue the top silver long bar to the coordinating shape toward the top of the bus. Glue the side oval silver mirror shapes to the coordinating shapes on with side of the combined bus. Use pieces of foam adhesive squares to attach the bottom silver bumper piece.
6. Curve the three wreath pieces as you like and place them on top of each other; smallest on top and alternating branches.
7. Glue the wreath pieces inner circles together keeping placement. Glue the combined wreath to the front of the combined bus; centering it over the center circle.
8. Use foam adhesive squares to attach the combined bus to the front of the card base; centering it. Finish with a bow on the wreath:)

Monday, November 19, 2018

Christmas Hanging Tea Light Lantern



Christmas Hanging Tea Light Lantern (Flameless)-JMRush
Lantern size: W 2.5 x D 2.5 x H 5”

This Flameless Hanging Tea Light Lantern features cut outs and when vellum paper is used, a layered transparent frosted glass effect is created. This lantern has a secure bottom that allows it to be hung and still allows access to the tea light on/off switch. This design is compatible with both 8X12 and 12X12 mats.


You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com  Coming Soon:)
Cricut measurements for grouping: w 11.8917

1.Cut design pieces. ( I used double sided card stock and vellum paper)
2. Flip the two lantern base pieces over. Glue the snow window pieces to the coordinating shapes on the bases. Make sure that they align properly on the face down side.
3. Glue the vellum paper to the window panels; centering around each of the cut out sections.
4. Fold all score lines. 
5. Line up the two lantern window pieces. Apply glue to the long side tab of the lantern and secure to the other lantern window base piece.
6. Apply glue to the other long side tab of the lantern window base and secure to the inside of the other lantern window base piece; creating a box. Hold until secure.
7. This is what it should look like:)
8. Apply glue to one top tab and secure the top tab to the inside of the next angled triangle. Repeat for the rest of the top tabs until fully enclosed. Glue the two circular hangers together hold until secure.
9. I use a tool to help secure the tabs from the inside of the lantern.
10. This is what it should look like:)

11. Apply glue to the top two tabs of the Lantern square base and secure to the inside of the sides.
12. Apply glue to the bottom two tabs of the Lantern square base and secure to the inside of the sides; creating a shallow box.
13. Apply a dab of glue to the inside of the lantern tea light base just under the slot. (This will help to secure the tab when it passes through.)
14. Tuck the end tab into the slot creating a circular tube shape. Secure until dry.
15. Place the narrow circular ring piece and square piece over the tube shape you just created.
16.-17. Apply glue to the outside of the tabs on the square side and secure downward to the square piece.
18.-19. Flip this piece over so the circular side is up. Apply glue to the outside of the tabs on the circular side and secure downward to the circular piece. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top. This is what it should look like:)
20. Place a flameless tea light candle inside the lantern square base; centering it. Apply glue to the bottom of the square side of the combined 
lantern tea light base. Place inside the lantern square base and secure.

21. Glue the little snowflakes to the window sections of the lantern.
22. Apply glue to the inside edges of this piece and place the lantern window piece inside the box. Secure until dry. 
23. Use a piece of foam adhesive square to attach the two snowflakes together. Smaller one on top. Use a adhesive jewel to accentuate the center.

24. I finished this lantern with a ribbon:)

Thursday, November 15, 2018

Girl Reindeer Hug Gift Card Holder




Girl Reindeer Hug Gift Card Holder-JMR
Approximate Card size: 4” x 5.75” 

This card features character arms that open to release a hidden gift card section. This design is compatible with both 8X12 and 12X12 mats.

You can purchase the Silhouette design file here: https://www.silhouettedesignstore.com/artists/485222

You can purchase the SVG and Cricut compatible file here:https://www.jamieandjenn.com 

1.Cut design pieces. I used double sided card stock.
2. Fold the card along score lines. Glue the oval mouth (with smile cutout) to the solid oval mouth base. Glue the combined jingle bell to the solid jingle bell base. Glue the eyes ( with cutouts) to the coordinating solid eye bases.
3. Apply glue the bottom of the side tabs on the card base. Secure by folding upward toward the card base.
4. Insert gift card. Glue the reindeer head (with cutouts) to it’s coordinating solid reindeer head shape;centering it.
5. Glue the eyes and ears into the coordinating shapes on the combined card base. Glue the small nose to the combined mouth piece.
6. Flip the combined reindeer head over. Use foam adhesive squares at the top and middle and glue at the bottom to attach the combined reindeer head to the card base;aligning at the top and edges and centering it.
7. Glue the collar piece under the combined head piece on the card base. Glue the small bow circle to the solid bow piece. ( I used ribbon instead of the piece) Use a foam adhesive square to attach the combined mouth piece.
8. Glue the combined jingle bell to the collar piece. Glue the bow to the top of the reindeer head.
9. Flip the card over and glue the hooves to the coordinating shapes on the arms of the card base. Flip the card back over. Tuck the hooves into their slots. I used ribbon to trim the card:).

Christmas Hug Gift Card Holders that you may also be interested in:)