Thursday, November 30, 2017

Monday, November 27, 2017

Snowflake Gift Tag Ornament



Snowflake Gift Tag Ornament- JMRush 
Approximate size: H 3.75” X W 3.75”


This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Glue the snowflake to the Ornament base; centering it.
3. Flip the combined ornament over and glue the white gift tag piece on; centering it.
4. Finish with a ribbon:)

Silhouette Black Friday Sale 2017:)

Don't miss the Silhouette Design Store Black Friday sale! 50 percent off all designs online:) You can also purchase SVG files now. You can find mine here: https://www.silhouettedesignstore.com/artists/485222



Don't miss the Silhouette Design Store Black Friday sale! 50 percent off all designs online:) You can also purchase SVG files now. You can find mine here: https://www.silhouettedesignstore.com/artists/485222


Snowflake Round Gift Tag Ornament



Snowflake Round Gift Tag Ornament- JMRush 
Approximate size: H 3.50” X W 3.25”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock.
2. Attach the snowflake circle to the silver circle using pieces of square foam adhesive. Flip the ornament base over and glue the white gift tag piece on; centering it.
3. Flip the ornament base  back over and glue the combined snowflake on; centering it.
4. Finish with a ribbon:)

Tuesday, November 21, 2017

Dachshund Gift Tag Ornament

Dachshund Gift Tag Ornament- JMRush 
Approximate size: W 4.5” X H 3”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2.  Glue the dog silhouette without a mouth to the full dog silhouette (with hat) shape. Glue the smaller ear silhouette to the larger ear silhouette;centering it. Glue the sweater piece to the dog silhouette with a mouth. Glue the hat trim piece to the hat base piece. Attach the puff ball to the combined hat piece using a piece of foam adhesive.
3. Glue the collar piece to the combined sweater dog silhouette. Glue the combined ear to the combined sweater dog silhouette.
4. I used a small enamel dot to accentuate the eye on the combined full dog layer. Use foam adhesive squares to attach the combined sweater dog to the combined full dog silhouette. Glue the tip of the tail to the combined full dog silhouette. I used a small enamel dot to accentuate the nose.
5. Use a foam adhesive square to attach the combined hat to the combined dog. 
6. Flip the combined dog over and glue the white dog silhouette to the back ( When using as a gift tag:)
7. Loop a ribbon through the hanging circle and finish with a bow:)

Labrador Retriever Sweater Hat Card



Labrador Retriever Sweater Hat Card- JMRush 
Approximate size: H 4.25” X W 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

  1. Cut design pieces. 
  2. Fold the card base. Glue the dog silhouette with two and half legs to the coordinating solid dog silhouette shape. Glue the hat trim and puff ball to the hat. Glue the sweater to the other dog silhouette.
  3. Glue the sweater combination dog silhouette to the larger dog silhouette. (I used foam adhesive squares on the torso of the sweater dog silhouette and glue on the head, legs, and tail.)
  4. Use foam adhesive squares to attach the dog ear to the combined dog. Glue the collar on. Use a foam adhesive square to attach the combined hat to the combined dog.
  5. Apply glue to the backside of the combined dog and a foam adhesive square to the back of the hat.
  6. Center and attach to the front of the card:)

3D Star Wreath Card



3D Star Wreath Card- JMRush 
Approximate size: H 4.25” X W 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222


1. Cut design pieces. I used double sided card stock.
2. Fold card base. Crease the center line score line on the stars; center creases will be up and stops at the center. Crease the rest of the score lines of the stars. (All of the score lines of the points of the stars fold up.) Curve the wreath branches as you like.
3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue to the front of the card base. Use foam adhesive squares to attach the star to the star ornament base. 
4. Finish with a ribbon:)

Monday, November 20, 2017

3D Star Ornament Gift Tag

3D Star Ornament Gift Tag- JMRush 
Approximate size: W 4” X H 4.25”


This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.
You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com

1. Cut design pieces. I used double sided card stock. ( This file comes with an additional flat star to be used on the backside when used as a gift tag:)
2. Crease the center line score line on the stars; center creases will be up and stops at the center. Crease the rest of the score lines of the stars. (All of the score lines of the points of the stars fold up.)
3. Use foam adhesive squares to attach the star to the star ornament base.  Repeat for the other star on the backside when used as an ornament replace with the flat star when used as a gift tag:)
4.-5. Finish with a ribbon:)

Thursday, November 16, 2017

Snowflake Tea Light

Snowflake Tea Light-Flameless JMRush 
Approximate size: W 3.25” X H 2.5” X D 3.25”

This file is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces.
2.  Fold each snow flake at the score lines. Fold the tabs of the lantern base.
3.-4. Apply a dab of glue to the inside of the lantern base just under the slot. (This will help to secure the tab when it passes through.) Tuck the end tab into the slot creating a circular tube shape.
5. Place the narrow circular ring pieces over the tube shape you just created (pretty side down).
6. Apply glue to the outside of one of the rows of tabs and secure downward to the narrow ring.
7. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top.

8.-9.  Flip the lantern base over. Place tea light inside the ring. Repeat as before; Apply glue to the outside of the tabs and secure downward to the narrow ring. Apply glue to the tops of the ring and tabs and secure the thicker circular ring to the top. Apply glue to one side of the back of one of the snowflakes.
10. Attach the backside of another snowflake and align all edges.
11. Repeat for the last snowflake.
12. It should look like this:)
13. Open the combined snowflake grouping so that the single layer snowflakes are facing you. Apply glue to the inner ring and attach over the flameless candle. ( I used hot glue for this step).
14. I used adhesive jewels at the center of each circle to give it sparkle:)


Ice Skates Sled Ornament Gift Tag



Ice Skates Sled Ornament Gift Tag- JMRush 
Approximate size: W 2.75” X H 6”

This design file is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or an ornament.
You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used doubled sided card stock)
2.  Flip the ornament base over and glue the coordinating gift tag (white) to it. Glue the wood plank pieces to the coordinating shapes on the sled base. Glue the ice skates shoes and blades to the coordinating shapes on the ice skates solid bases. Curve the branches of the two wreath pieces.
3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue the thin small red piece to the center top of the combined sled.
4. Use a foam adhesive squares to attach the combined sled to the front of the ornament base; centering it. Use a foam adhesive squares to attach the combined wreaths to the front of the combined sled.
5. Using a large gauge thread or small width ribbon, tie two bows and cut a three inch piece. 
6.-7.Glue one thread bow to each ice skate and glue the ends of the 3” thread to the backside of each ice skate ( I used hot glue for this).
8. Loop the thread of the ice skates around the center branch of the combined wreath. Glue into place if you like.
9.-10.  Finish with a ribbon:)

Ski Squirrel Ornament Gift Tag



Ski Squirrel Ornament Gift Tag- JMRush 
Approximate size: W 5” X H 3.25”

This design is compatible with both 8X12 and 12X12 mats and can be used as a gift tag and or ornament.
You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. I used double sided card stock:)
2.. Glue each ski to the squirrel base piece.
3. Glue the large squirrel piece to the coordinating shape on the combined squirrel base piece. 
4. Glue the small squirrel body piece (with no arms) to the combined squirrel base piece. 
5. Glue the tip of the single ski pole to the combined squirrel base at the coordinating shape. Tuck the single ski pole under the arm of the last squirrel body piece and glue to the combined squirrel base piece.
6. Glue the scarf, nose, and small black ski foot loops to the coordinating shape on the combined squirrel base.
7. Glue the head to the combined squirrel base piece.
8. Flip the combined squirrel over and glue the white gift tag backing (squirrel shaped).
9. I used adhesive enamel dots to accentuate the eye and looped ribbon through the ornament loop at the top.

10.-11. I finished with a bow and a button at the top:)

Wednesday, November 15, 2017

Ice Skates Sled Card


Ice Skates Sled Card- JMRush 
Approximate size: W 4.25” X H 5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222





1. Cut design pieces. ( I used doubled sided card stock)
2.  Fold the card base. Glue the wood plank pieces to the coordinating shapes on the sled base. Glue the ice skates shoes and blades to the coordinating shapes on the ice skates solid bases. Curve the branches of the two wreath pieces.
3. Adjust the smaller wreath to set as you like on top of the larger one. Apply glue to the very inside ring of the bottom wreath and secure the smaller wreath on top. Glue the combined sled to the sled runners; align at the horizontal cross bars.
4. Use a foam adhesive squares to attach the combined sled to the front of the card; centering it. Using a large gauge thread or small width ribbon, tie two bows and cut a three inch piece. Glue the thin small red piece to the center top of the combined sled.
5. Use a foam adhesive squares to attach the combined wreaths to the front of the combined sled. Glue one thread bow to each ice skate and glue the ends of the 3” thread to the backside of each ice skate ( I used hot glue for this).
6. Loop the thread of the ice skates around the center branch of the combined wreath. Glue into place if you like.
7. Finish with a ribbon:)

Tuesday, November 14, 2017

Snowflake Ornament



Snowflake Ornament- JMRush 
Approximate size: W 3.25” X H 3.25” X D 3.25”

This file is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222

1. Cut design pieces. ( I used double sided card stock)
2.  Fold each sow flake at the score lines.
3.  Apply glue to one side of the back of one of the snowflakes.
4. Attach the backside of another snowflake and align all edges.
5. Repeat for the other two sets.
6. Apply glue to one side of the back of one of the combined snowflakes.

7. Attach another combined snowflake set; aligning all of the edges on that half. 
8. Open the combined snowflake grouping so that the single layer snowflakes are facing you. Apply glue to both halves and attach the remaining snowflake set; aligning all edges.
9. Image of all snowflakes together.
10. String ribbon through the circle hole at the top of the combined snowflakes and tie at the top. 
11. Attach a ribbon at the top of the snowflake.
12. I used adhesive jewels at the center of each circle to give it sparkle:)


Dachshund Christmas Card

Dachshund Christmas Card- JMRush 
Approximate size: H 4.25” X HW5.5”

This design file is compatible with both 8X12 and 12X12 mats.

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222


1. Cut design pieces.
2.  Fold the card base. Glue the dog silhouette without a mouth to the full dog silhouette (with hat) shape. Glue the smaller ear silhouette to the larger ear silhouette;centering it. Glue the sweater piece to the dog silhouette with a mouth. Glue the hat trim piece to the hat base piece.
3. Glue the collar piece to the combined sweater dog silhouette. Glue the combined ear to the combined full dog silhouette.
4. Use foam adhesive squares to attach the combined sweater dog to the combined full dog silhouette. Glue the tip of the nose and tail to the combined full dog silhouette. Attach the puff ball to the combined hat piece using a piece of foam adhesive. 
5. Use a foam adhesive square to attach the combined hat to the combined dog. Glue the combined dog to the card front. I used small enamel dots to accentuate the collar, nose, and eye:)

Wednesday, November 1, 2017

Llama Treat Box



 Llama Treat Box- JMRush 
Approximate size: W 3.25” X H 7.75” X D 3.50”
Approximate box size: W 2” X H 2.25” X D 3.25”

This cute Llama treat box can be used to hold small party favor treats and is compatible with both 8X12 and 12X12 mats. 

You can purchase this Silhouette design file or SVG bundle here: https://www.silhouettedesignstore.com/artists/485222


You can purchase this Cricut compatible SVG design file here: https://www.jamieandjenn.com


1. Cut design pieces. ( I used double sided card stock) This file contains a tail piece that is not shown in the tutorial. 
2.  Fold the box base. Glue the solid llama silhouette to the larger llama silhouette; centering it and aligning at the bottom. Glue the long llama face/neck silhouette to the larger llama face/neck; centering it and aligning at the bottom. Glue the backside to the larger backside piece. Glue the party hat (pink) piece to the solid party hat piece (Gold).
3.  Apply glue to the two tabs I’m pointing to on the box base. Attach to the panel directly above and directly below. Glue the small black hooves to the combined llama and combined llama backside. Glue the nose/mouth piece to the muzzle. 
4. Glue the pink harness piece to the combined muzzle. Apply glue to the tabs where the glue bottle and my finger are pointing ( I need another set of hands sometimes;) and secure tucking the side tab into the inside of the box you just created.
5. Image of the side tab being secured into the inside of the box.
6. Use foam adhesive squares to attach the combined muzzle and top notch hair piece to the combined long face/neck llama. Glue the eye lashes into place.


7. Use foam adhesive squares to attach the combined long face/neck piece to the larger combined llama silhouette. Glue the tips of the ears of the combined face/neck to the combined larger llama silhouette. Attach the combined party hat to the combined llama with glue.
8. Apply glue to the narrow side of the box. Attach to the backside of the llama combined backside; aligning just above the center opening in between the llamas legs and centering it. Allow to dry.
9. Apply glue to the other narrow side of the box. Attach to the backside of the llama combined font side; aligning just above the center opening in between the llamas legs and centering it. 
10. You may want to flip your llama over to make sure you have the box aligned properly. Allow to dry. Attach the tail with a foam adhesive square on the backside.
11. Finish by filling your llama with goodies and with a ribbon on his neck:)